ClearOne V-There 2000 Guia de preparacion descargar pdf (Pagina 29)

 User Number – Enter your user number used for identification on the

COLLABORATE Central server. If not entered, the COLLABORATE Central

server will automatically generate a number.

 Password – Enter the password used to log into the COLLABORATE Central

server.

 Gatekeeper – Select this option if you want COLLABORATE Room to

communicate/interact with a gatekeeper server. If selected, enter the required

details in the following fields:

 Server Address – Enter the IP address of the gatekeeper server.

 User Name – Enter the user name used to log into the gatekeeper server.

 User Number – Enter the user number used for identification on the gatekeeper

server.

 Password – Disabled when working with a gatekeeper because gatekeeper

authentication is currently not supported.

 Connection Mode – Select the protocol you want to use to connect your call.

 H.323 - This selection should be selected manually for LAN network

connections only when the connection type is known.

 H.460 - This selection should be selected manually for network connections

over Firewall/NAT only when the connection type is known.

 Tunneling (not available when working with a gatekeeper) - This selection

should be selected manually for ClearOne Proprietary Tunneling. The default

tunneling port is configured by the System Administrator (see NetPoint/

COLLABORATE Central Administration Configuration Manager).

NOTE: Changing this setting causes COLLABORATE Room to

reload.

 RTP Ports – In the two boxes, set the RTP range:

 From – Enter the minimum RTP value.

 To – Enter the maximum RTP value.

3. Select Apply.

COLLABORATE Room: Installation and Setup Guide 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Sin comentarios

ClearOne V-There 2000 Guia de preparacion Pagina 29