ClearOne DigiLinX NS-IPD-100 Manual de usuario descargar pdf (Pagina 8)

5 Technical Support: 800-283-5936

On the Device Panel, click on the 3. Enable Static IP and enter the IP, Subnet Mask and Gateway addresses

of the interface device (TLA250 as shown in the Basic Connection diagram). Optionally, check the Enable

DHCP checkbox if a DHCP server is to be used. If the DHCP is enabled and a DHCP server are not avail-

able, the TLA250 or the SL251 will revert to the Auto IP address settings in the Dealer Setup.

Click on the “4. Apply” button in the lower-left of the Device Panel.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

ClearOne DigiLinX NS-IPD-100 Manual de usuario Pagina 8